ASP Developer Network - Brought to you by Steve Radich and BitShop, Inc. - http://www.bitshop.com

ASPDeveloper

ASPDeveloper.Net / VirtualServerFAQ.COM

Make sure you go to our home page for:

* Virtual Server 2005 FAQ
* ASP.Net 2.0 Information
* ASP.Net 2.0 Streaming Tutorials
* ASP.Net 2.0 HTML based Tutorials

Made possible by Business Internet Technology Shop (BitShop)

Virtual Server 2005

Recent Virtual Server 2005 posts

* Hyper-v R2 Cluster Shared Volume requirement
* Windows 2008 Failover Clustering guest OS nodes
* Can not connect to Hyper-V from management console.
* Virtualisation
* moved vhd, startup fails
* memory trimming
* Hyper-V, private virtual networks on different subnets
* virtual server --> hyper-v
* VM Connection from client
* Hyper-V Startup Script Not Working
* Virtual Server 2005 R2 SP1 over Win2003 Server 2003 R2 SP2
* rebuilt hyper-v host and now cannot start vm
* Represent SAN lun in Hyper-v, without exposing i to the host
* Hyper-V Network with Multiple Adaptors.
* Network Adapter & Legacy Network Adapter
* differencing disk
* VMRCPlus and Windows XP Pro SP3
* VS2005 running my DC
* New to VS and I have a question about 64 bit.
* Emulate hyper-v

Add Solution

VMBUS network adapter failed to start (Code 10)

Source: microsoft.public.virtualserver
Sent: 09/08/2009
From: Jason Blake
Message:

Hi Guys.

Im my test lab I have a very annoying problem that was initially caused by
updating a 2008 Standard Edition runing Hyper-V with Update for Windows
Server 2008 x64 Edition (KB950050). Initally the VMs created using the pre
release version of hyper V role would not start after the update.

I had to follow KB949222 to get the VMs started by removing them, recreating
the virtual networks then create the new VM and point to the exisiting saved
VHD file.

Now on the newly started VMS The VM Bus network adapter does not start with
an error code 10. I have tried to reinstall the Intergration services etc
cant get the adapter to start. Ive tried various things without success, can
anyone help.

The Code 10 seems to relate to the driver being installed but cannot run.
The problem seems to be with netvsc60.sys version 6.0.6001.17101.

thanks for any replies

Post Reply | This is Spam! | Mark as Spam

Related Messages

RE: VMBUS network adapter failed to start (Code 10)

Sent: 09/09/2009
From: Jason Blake
Message:

I did not remove the pre-release version of hyperV on the 2008 Server Host
before applying the update. 950050 update. I dont believe the notes on the
950050 update mentions doing this. Im assuming it was a pre release version
on the test server as thats what KB949222 refers to as being the problems
with the VMs not starting.

Have you any suggestions ?

"Roger Johnson, MCITP (SA, EA)" wrote:

Show quoted text

> Jason,
>
> Did you remove the pre release version of Hyper-V prior to installing the
> 950050 update. More important, did you remove the pre release version while
> running in safe mode? It was once suggested to remove the pre release version
> while running in safe mode to avoid weird behavior in Hyper-V after the
> upgrade.
>
> If not, them it may be worth booting into safe mode to perform any clean up
> that may be required.
>
> "Jason Blake" wrote:
>
> > Hi Guys.
> >
> > Im my test lab I have a very annoying problem that was initially caused by
> > updating a 2008 Standard Edition runing Hyper-V with Update for Windows
> > Server 2008 x64 Edition (KB950050). Initally the VMs created using the pre
> > release version of hyper V role would not start after the update.
> >
> > I had to follow KB949222 to get the VMs started by removing them, recreating
> > the virtual networks then create the new VM and point to the exisiting saved
> > VHD file.
> >
> > Now on the newly started VMS The VM Bus network adapter does not start with
> > an error code 10. I have tried to reinstall the Intergration services etc
> > cant get the adapter to start. Ive tried various things without success, can
> > anyone help.
> >
> > The Code 10 seems to relate to the driver being installed but cannot run.
> > The problem seems to be with netvsc60.sys version 6.0.6001.17101.
> >
> > thanks for any replies
> >
> >
> >
> >

Re: VMBUS network adapter failed to start (Code 10)

Sent: 09/10/2009
From: "Geoff N. Hiten" <(email address - cut out)>
Message:

I ran into the same problem when I tried to update my WIndows Server 2008
box to 2008 R2. I think it is related to motherboard drivers not
implementing a specific PCI-Express feature. I had other issues with the
upgrade and had to reload Windows Server 2008.

I would manually seek out the latest motherboard drivers and update them.
Same for any other hardware drivers.

--
Geoff N. Hiten
Principal SQL Infrastructure Consultant
Microsoft SQL Server MVP

"Jason Blake" <(email address - cut out)> wrote in message
news:(email address - cut out)...

Show quoted text

>I did not remove the pre-release version of hyperV on the 2008 Server Host
> before applying the update. 950050 update. I dont believe the notes on
> the
> 950050 update mentions doing this. Im assuming it was a pre release
> version
> on the test server as thats what KB949222 refers to as being the problems
> with the VMs not starting.
>
> Have you any suggestions ?
>
>
>
> "Roger Johnson, MCITP (SA, EA)" wrote:
>
>> Jason,
>>
>> Did you remove the pre release version of Hyper-V prior to installing the
>> 950050 update. More important, did you remove the pre release version
>> while
>> running in safe mode? It was once suggested to remove the pre release
>> version
>> while running in safe mode to avoid weird behavior in Hyper-V after the
>> upgrade.
>>
>> If not, them it may be worth booting into safe mode to perform any clean
>> up
>> that may be required.
>>
>> "Jason Blake" wrote:
>>
>> > Hi Guys.
>> >
>> > Im my test lab I have a very annoying problem that was initially caused
>> > by
>> > updating a 2008 Standard Edition runing Hyper-V with Update for Windows
>> > Server 2008 x64 Edition (KB950050). Initally the VMs created using the
>> > pre
>> > release version of hyper V role would not start after the update.
>> >
>> > I had to follow KB949222 to get the VMs started by removing them,
>> > recreating
>> > the virtual networks then create the new VM and point to the exisiting
>> > saved
>> > VHD file.
>> >
>> > Now on the newly started VMS The VM Bus network adapter does not start
>> > with
>> > an error code 10. I have tried to reinstall the Intergration services
>> > etc
>> > cant get the adapter to start. Ive tried various things without
>> > success, can
>> > anyone help.
>> >
>> > The Code 10 seems to relate to the driver being installed but cannot
>> > run.
>> > The problem seems to be with netvsc60.sys version 6.0.6001.17101.
>> >
>> > thanks for any replies
>> >
>> >
>> >
>> >

Post Reply | This is Spam! | Mark as Spam

Other groups

Virtual PC (Mac)(3592)	Virtual PC(12844)	Virtual PC (French)(496)
Virtual Server 2005(6245)

Our Sponsors

Virtual Server 2005 Info Here!
http://www.aspdeveloper.net

Wiki

Blogs

Articles

Image galleries

File galleries

Forums

Maps

Directories

ASP Developer Network (since 1996) - Brought to you by Steve Radich and BitShop, Inc. - http://www.bitshop.com
Copyright © 1997-2005 by BitShop, Inc. All Rights Reserved.
No content may be reproduced in any form without written permission from BitShop, Inc.
We will be honored to assist with reproduction rights on our material if you contact us.
We also can provide print articles for your magazine, private training seminars at your site, and conference presentations.
Thank you for visiting. Please bookmark our site if you found it useful!
If you wish to make a donation it will help further the development of these free resources: