Sent: 04/06/2007
From: w2ks
Message:manually configuring the IP works. it used to work with DHCP, is there any
reason why it can't find it?
"Bill Grant" wrote:
Show quoted text
> That usually indicates that the machine is set to get its network config
> from DHCP but there is no DHCP service available.
>
> Is the guest NIC set to use the network associated with the physical
> NIC in the host? Does it do anything if you manually configure it with an IP
> address in the same IP subnet as the host's NIC?
>
> "w2ks" <(email address - cut out)> wrote in message
> news:(email address - cut out)...
> > Hello,
> > i installed virtual server on a H drive, instead of the default C drive,
> > and
> > then i change the default path to point to H drive. at one point i got the
> > network connection to work, but after restarting the host, somehow i am
> > getting a limited network connectivity for my virtual machine network. i'm
> > using 2005 R2. could anyone offer a suggestion?
> >
> > the host network has 1Gbps connection. and when i did got the Virtual
> > machine network to work at 100mbps, it was really slow.
>
>
>
Sent: 04/06/2007
From: "Bill Grant" <not.available@online>
Message: That usually indicates that the machine is set to get its network config
from DHCP but there is no DHCP service available.
Is the guest NIC set to use the network associated with the physical
NIC in the host? Does it do anything if you manually configure it with an IP
address in the same IP subnet as the host's NIC?
"w2ks" <(email address - cut out)> wrote in message
news:(email address - cut out)...
Show quoted text
> Hello,
> i installed virtual server on a H drive, instead of the default C drive,
> and
> then i change the default path to point to H drive. at one point i got the
> network connection to work, but after restarting the host, somehow i am
> getting a limited network connectivity for my virtual machine network. i'm
> using 2005 R2. could anyone offer a suggestion?
>
> the host network has 1Gbps connection. and when i did got the Virtual
> machine network to work at 100mbps, it was really slow.
Sent: 04/07/2007
From: "Bill Grant" <not.available@online>
Message: It is probably an incompatibility between Virtual Machine Network Services
and the driver in the host OS for your NIC. There have been a few problems
with virtual networking and Gb NICs, especially the Broadcom ones. If you
don't have the newest version of the driver it may be worth trying it.
"w2ks" <(email address - cut out)> wrote in message
news:(email address - cut out)...
Show quoted text
> manually configuring the IP works. it used to work with DHCP, is there any
> reason why it can't find it?
>
> "Bill Grant" wrote:
>
>> That usually indicates that the machine is set to get its network
>> config
>> from DHCP but there is no DHCP service available.
>>
>> Is the guest NIC set to use the network associated with the physical
>> NIC in the host? Does it do anything if you manually configure it with an
>> IP
>> address in the same IP subnet as the host's NIC?
>>
>> "w2ks" <(email address - cut out)> wrote in message
>> news:(email address - cut out)...
>> > Hello,
>> > i installed virtual server on a H drive, instead of the default C
>> > drive,
>> > and
>> > then i change the default path to point to H drive. at one point i got
>> > the
>> > network connection to work, but after restarting the host, somehow i am
>> > getting a limited network connectivity for my virtual machine network.
>> > i'm
>> > using 2005 R2. could anyone offer a suggestion?
>> >
>> > the host network has 1Gbps connection. and when i did got the Virtual
>> > machine network to work at 100mbps, it was really slow.
>>
>>
>>
Sent: 06/26/2007
From: "Todd Ludington" <(email address - cut out)>
Message:I am having the same problem I believe. I have made sure the Virtual
Machine Tools have been updated to the current version. Also I just updated
my Broadcom drivers to 3.0.9.0 and restarted the server, there is still no
connectivity on certain machines. I find the following in the Virtual
Server Event Viewer just after the machine was started.
The virtual machine "dev" cannot connect virtual network adapter 1 because
either the virtual network is invalid or access was denied. This virtual
network adapter will be left disconnected.
Thanks
Todd
"Bill Grant" <not.available@online> wrote in message
news:(email address - cut out)...
Show quoted text
> It is probably an incompatibility between Virtual Machine Network
> Services and the driver in the host OS for your NIC. There have been a few
> problems with virtual networking and Gb NICs, especially the Broadcom
> ones. If you don't have the newest version of the driver it may be worth
> trying it.
>
> "w2ks" <(email address - cut out)> wrote in message
> news:(email address - cut out)...
>> manually configuring the IP works. it used to work with DHCP, is there
>> any
>> reason why it can't find it?
>>
>> "Bill Grant" wrote:
>>
>>> That usually indicates that the machine is set to get its network
>>> config
>>> from DHCP but there is no DHCP service available.
>>>
>>> Is the guest NIC set to use the network associated with the
>>> physical
>>> NIC in the host? Does it do anything if you manually configure it with
>>> an IP
>>> address in the same IP subnet as the host's NIC?
>>>
>>> "w2ks" <(email address - cut out)> wrote in message
>>> news:(email address - cut out)...
>>> > Hello,
>>> > i installed virtual server on a H drive, instead of the default C
>>> > drive,
>>> > and
>>> > then i change the default path to point to H drive. at one point i got
>>> > the
>>> > network connection to work, but after restarting the host, somehow i
>>> > am
>>> > getting a limited network connectivity for my virtual machine network.
>>> > i'm
>>> > using 2005 R2. could anyone offer a suggestion?
>>> >
>>> > the host network has 1Gbps connection. and when i did got the Virtual
>>> > machine network to work at 100mbps, it was really slow.
>>>
>>>
>>>
>
>