Sent: 08/28/2006
From: Roy, Steeve
Message:I get the same situation last week. In my lab, the network interface creation
fail on the host Virtual server. I suggest you to put step flag(echo...) on
the script and try to find where hang occure. Then you will be able to
execute the hangging command manually and step over.
Bye
"Jaycee" wrote:
Show quoted text
> I have a Windows 2003 SP1 machine that I'm trying to virtualize with VSMT.
> Everything works fine until I get to the last step which is to run the
> <servername>_deployvm.cmd. The PXE boot works, it restores the images and
> then it just hangs. Any ideas would be appreciated. Below is what is on
> the screen when it hangs:
>
> *************************
> Windows Automated Deployment Services
> Deployment Agent Version 1.1 Build 5149.15:10:19
>
> DEPOYMENT SERVICES
> Boot Selection: ramdisk(0)
> Boot Options: RDBUILD RDGUID={E597073D-BCA9-4935-8257-25530A5677D0}
> RDSERVERS={192.168.1.23} FASTDETECT ONECPU
> LOCAL NETWORK CONFIGURATION (PXE BOOT)
> IP Address: 192.168.1.116
> Subnet Mask: 255.255.255.0
> MAC Address: 00-E0-B8-53-64-E0
> Broadcast: Enabled
>
> DEPLOYMENT AGENT STATUS
> Connected [192.168.1.23]: Valid BMCP message received at 16:31:29
> **************************
>
> Thanks.
>
>
>
>
Sent: 08/29/2006
From: "Jaycee" <(email address - cut out)>
Message:On the computer that I'm testing, the whole VSMT tool process works when I
don't install all the Windows updates. After I install all the updates,
which includes Windows 2003 SP1, it hangs.
"Roy, Steeve" <(email address - cut out)> wrote in message
news:(email address - cut out)...
Show quoted text
>I get the same situation last week. In my lab, the network interface
>creation
> fail on the host Virtual server. I suggest you to put step flag(echo...)
> on
> the script and try to find where hang occure. Then you will be able to
> execute the hangging command manually and step over.
>
> Bye
>
> "Jaycee" wrote:
>
>> I have a Windows 2003 SP1 machine that I'm trying to virtualize with
>> VSMT.
>> Everything works fine until I get to the last step which is to run the
>> <servername>_deployvm.cmd. The PXE boot works, it restores the images
>> and
>> then it just hangs. Any ideas would be appreciated. Below is what is on
>> the screen when it hangs:
>>
>> *************************
>> Windows Automated Deployment Services
>> Deployment Agent Version 1.1 Build 5149.15:10:19
>>
>> DEPOYMENT SERVICES
>> Boot Selection: ramdisk(0)
>> Boot Options: RDBUILD RDGUID={E597073D-BCA9-4935-8257-25530A5677D0}
>> RDSERVERS={192.168.1.23} FASTDETECT ONECPU
>> LOCAL NETWORK CONFIGURATION (PXE BOOT)
>> IP Address: 192.168.1.116
>> Subnet Mask: 255.255.255.0
>> MAC Address: 00-E0-B8-53-64-E0
>> Broadcast: Enabled
>>
>> DEPLOYMENT AGENT STATUS
>> Connected [192.168.1.23]: Valid BMCP message received at 16:31:29
>> **************************
>>
>> Thanks.
>>
>>
>>
>>
Sent: 08/30/2006
From: "Andrew Prior" <(email address - cut out)>
Message:Mate, did you ever get anywhere with this with sp1 installed?
Andrew
"Jaycee" <(email address - cut out)> wrote in message
news:(email address - cut out)...
Show quoted text
>I have a Windows 2003 SP1 machine that I'm trying to virtualize with VSMT.
>Everything works fine until I get to the last step which is to run the
><servername>_deployvm.cmd. The PXE boot works, it restores the images and
>then it just hangs. Any ideas would be appreciated. Below is what is on
>the screen when it hangs:
>
> *************************
> Windows Automated Deployment Services
> Deployment Agent Version 1.1 Build 5149.15:10:19
>
> DEPOYMENT SERVICES
> Boot Selection: ramdisk(0)
> Boot Options: RDBUILD RDGUID={E597073D-BCA9-4935-8257-25530A5677D0}
> RDSERVERS={192.168.1.23} FASTDETECT ONECPU
> LOCAL NETWORK CONFIGURATION (PXE BOOT)
> IP Address: 192.168.1.116
> Subnet Mask: 255.255.255.0
> MAC Address: 00-E0-B8-53-64-E0
> Broadcast: Enabled
>
> DEPLOYMENT AGENT STATUS
> Connected [192.168.1.23]: Valid BMCP message received at 16:31:29
> **************************
>
> Thanks.
>
>
>
Sent: 08/31/2006
From: "Jaycee" <(email address - cut out)>
Message:Not yet, I haven't had any luck. I've been all over the net trying to find
a solution with no luck.
"Andrew Prior" <(email address - cut out)> wrote in message
news:(email address - cut out)...
Show quoted text
> Mate, did you ever get anywhere with this with sp1 installed?
> Andrew
> "Jaycee" <(email address - cut out)> wrote in message
> news:(email address - cut out)...
>>I have a Windows 2003 SP1 machine that I'm trying to virtualize with VSMT.
>>Everything works fine until I get to the last step which is to run the
>><servername>_deployvm.cmd. The PXE boot works, it restores the images and
>>then it just hangs. Any ideas would be appreciated. Below is what is on
>>the screen when it hangs:
>>
>> *************************
>> Windows Automated Deployment Services
>> Deployment Agent Version 1.1 Build 5149.15:10:19
>>
>> DEPOYMENT SERVICES
>> Boot Selection: ramdisk(0)
>> Boot Options: RDBUILD RDGUID={E597073D-BCA9-4935-8257-25530A5677D0}
>> RDSERVERS={192.168.1.23} FASTDETECT ONECPU
>> LOCAL NETWORK CONFIGURATION (PXE BOOT)
>> IP Address: 192.168.1.116
>> Subnet Mask: 255.255.255.0
>> MAC Address: 00-E0-B8-53-64-E0
>> Broadcast: Enabled
>>
>> DEPLOYMENT AGENT STATUS
>> Connected [192.168.1.23]: Valid BMCP message received at 16:31:29
>> **************************
>>
>> Thanks.
>>
>>
>>
>
>
Sent: 09/01/2006
From: "Andrew" <(email address - cut out)>
Message:makes two of us!
"Jaycee" <(email address - cut out)> wrote in message
news:e0$(email address - cut out)...
Show quoted text
> Not yet, I haven't had any luck. I've been all over the net trying to
> find a solution with no luck.
>
> "Andrew Prior" <(email address - cut out)> wrote in message
> news:(email address - cut out)...
>> Mate, did you ever get anywhere with this with sp1 installed?
>> Andrew
>> "Jaycee" <(email address - cut out)> wrote in message
>> news:(email address - cut out)...
>>>I have a Windows 2003 SP1 machine that I'm trying to virtualize with
>>>VSMT. Everything works fine until I get to the last step which is to run
>>>the <servername>_deployvm.cmd. The PXE boot works, it restores the
>>>images and then it just hangs. Any ideas would be appreciated. Below is
>>>what is on the screen when it hangs:
>>>
>>> *************************
>>> Windows Automated Deployment Services
>>> Deployment Agent Version 1.1 Build 5149.15:10:19
>>>
>>> DEPOYMENT SERVICES
>>> Boot Selection: ramdisk(0)
>>> Boot Options: RDBUILD RDGUID={E597073D-BCA9-4935-8257-25530A5677D0}
>>> RDSERVERS={192.168.1.23} FASTDETECT ONECPU
>>> LOCAL NETWORK CONFIGURATION (PXE BOOT)
>>> IP Address: 192.168.1.116
>>> Subnet Mask: 255.255.255.0
>>> MAC Address: 00-E0-B8-53-64-E0
>>> Broadcast: Enabled
>>>
>>> DEPLOYMENT AGENT STATUS
>>> Connected [192.168.1.23]: Valid BMCP message received at 16:31:29
>>> **************************
>>>
>>> Thanks.
>>>
>>>
>>>
>>
>>
>
>
Wiki